For large batch sizes and series production

PROFIMAT RT

Basic Data

Are you looking for a grinding solution for the production of large lot sizes or batch production? Then the PROFIMAT RT could be the right machine for you. This highly efficient production machine with a traveling column design is equipped with a rotary indexing table. This enables workpiece handling in parallel with the primary processing time, i.e. continuous, simultaneous loading and unloading during the grinding process. Low setup costs combined with high efficiency and the possibility of simple adaptation of automatic workpiece change systems set benchmarks in modern and cost-effective production.

With a maximum spindle power of 60 kW and a cutting speed of up to 170 m/s, the RT is ideally suited for both conventional grinding and for CD, IPD and all CBN grinding processes.

  • Rotary indexing table diameter 1,000 mm
  • Traveling column design
  • Rigid machine structure thanks to generous guide spacings
  • High infeed speeds and accelerations
Technical Data
kg / cm
lb / inches

Linear Axes

Max. Travel X 1000 mm
Max. Travel Speed X 20000 mm/min
Max. Travel Y 800 mm
Max. Travel Speed Y 3750 mm/min
Max. Travel Z 320 mm
Max. Travel Speed Z 4000 mm/min

Spindle drive

Max. Spindle Power 62 kW
Max. Number Of Revolutions 8000 /min
Max. Grinding Wheel Diameter 500 mm
Max. Grinding Wheel Width 160 mm

Workpiece Data

Rotary Table Diameter 1000 mm

Linear Axes

Max. Travel X 39.300 inch
Max. Travel Speed X 787 inch/min
Max. Travel Y 31.400 inch
Max. Travel Speed Y 148 inch/min
Max. Travel Z 12.500 inch
Max. Travel Speed Z 157 inch/min

Spindle drive

Max. Spindle Power 84.000 hp
Max. Number Of Revolutions 8000 rpm
Max. Grinding Wheel Diameter 20.000 inch
Max. Grinding Wheel Width 6.000 inch

Workpiece Data

Rotary Table Diameter 39.000 inch
Downloads
pdf, 6 MB
Product brochure
Download
en