Surface & Profile

MÄGERLE BLOHM JUNG

Cylindrical

STUDER SCHAUDT MIKROSA

Tools

WALTER EWAG

Mägerle MFP 50 – The productive machine

MFP 50 - 5-axes grinding centre with tool changer - The productive machine

Form when dealing with challenging workpieces. The high axis speed, minimal auxiliary times and quick tooling change make the MFP 50 one of the most productive machines of its kind.

Processes such as grinding, cutting and drilling can be achieved to absolute perfection in a single clamping. High productive benefit with simple operation are the result. The intelligent design principle takes production quality, safety and cost efficiency to a new level. The coolant nozzle, controllable via two axes, allows unrestricted freedom of movement and precise positioning of the coolant jet.

Spindle speeds of up to 10 000 revolutions per minute guarantee the highest machining precision.The grinding wheels are always mounted right at the front of the spindle, and the profile is changed through automatic positioning of the diamond rolls in the direction of the Z-axis. This allows a generous machining clearance, as collisions between wheel flange and workpiece are practically excluded.

In the MFP 50 the grinding wheel diameter is used to the maximum, resulting in significant cost savings.

X-axislongitudinal stroke mm500
Travel speed mm/min 0...20000
Y-axis  vertical strokemm650
Travel speed mm/min 0...20000
Z-axis transverse stroke mm650
Travel speed mm/min 0...20000
Grinding spindle drive - power max.kW25 / 50
Rpm range max.rpm0...10000
V-axis profile crushing device, roll width, max.mm217
Tool changer positions - grinding wheelsn/Pos 8 / 16
Tool changer positions - measuring probe, drill n/Pos 12 / 24
Tool length max.mm200
Grinding wheel dimensions (Ø-external x W x Ø-bore) mm300 x 60 x 76.2
Tool holding fixture HSKB-80 dividing device
Swivel axes n / Axes2 / 3
Grinding wheel peripheral speed m/s35
- with key-operated switch switchable to m/s50
- with additional flange monitoring switchable up to m/s63

 

 

 

 

horizontale Zusatzspindel (Ansicht 1)
horizontale Zusatzspindel (Ansicht 2)
integration Handlingsystem

 

Applications

Turbine stator vanes
Turbine rotor vanes
Hirth gear
Hirth coupling
We use cookies to optimize the functionality of the website and for web analysis. If you use our website, you agree. For further information, including revocation of consent, please refer to our privacy policy (see Legals).
I agree