Walter Vialog Helicheck Pro
For high tolerances & standard tool sizes
The Walter Helicheck Pro is a 4-axis machine with a new 3D Directview system, featuring three fixed CCD cameras for higher stability and accuracy, especially on small details. Repeatablility ≤1 micron (±0.000,04”). Suitable for aerospace, PCD and other high tolerance tools, including turbine and woodworking cutters. Inspects tools up to about 8” in diameter and 12” long (200 x 300 mm).
Benefits:
- Setup offline on PC & network with Helitronic tool grinders
- Machines stay productive
- REDUCE SETUP TIME ON THE GRINDER UP TO 50%
- Fully automatic, non-contact inspection
- Faster than manual methods
- Repeatability of ≤1 micron (0.000040 in.)
- Accuracy of ±1.4 microns (0.00006 in.) + L/300 using NIST certified gage
- 4,600 lb. granite block for thermal and vibrational stability — Far superior to metal construction
- Glass scales in all linear axes for sub-micron precision
- CNC controlled to eliminate operator variability
- Three fixed CCD cameras measure every detail from three angles without rotating or swivelling - Higher stability and accuracy
- Top light and front light with 200x magnification; Back light 50x
- New supplementary lighting units for precise K-land measuring
- Wheel & final tool inspection, spot checks and reverse engineering in one machine
- Complete wheel measuring includes exact grinding point
- 50 taper spindle with adapters for nearly all tool and wheel holders – including wheel sets for non-WALTER machines
- Optional probe for flute profile & other measurements not possible with a camera
- Prints inspection documentation to support DIN ISO 9000
- Capacity: 8 in. in diameter and 12 in. long (200 x 300 mm)
- Optimum tool diameter 1 to 200 mm
Also in this section...
